Bluetooth PAN

Personal Area Networking Profile of Bluetooth protocol allows you to connect your Maemo device via another device to another network such as the Internet.

The Connection manager is used for this purpose, exactly the same way as you connect to a WLAN network or to a cell phone dial-up connection (Bluetooth DUN). Most Windows Smartphones use this method of connection when used as a modem via Bluetooth.

If you have Nokia N900 you may instead use it as PAN server to allow an other device such as a Nokia N8x0 to utilize Bluetooth PAN.

Contents

[edit] Bluetooth NAP

NAP stands for Network Access Point. It's a PAN profile for serving incoming connections.

[edit] Installing

For the Nokia N900 pan is disabled by default. To enable it, edit /etc/bluetooth/main.conf and remove network from the disabled plugins 

[General]
# List of plugins that should not be loaded on bluetoothd startup
DisablePlugins = network,input,hal

libicd-network-null is also recommended for using internet over bluetooth 

apt-get install libicd-network-null

For other devices you need to install maemo-pan through the Application manager. You may need to restart your tablet after installation in order to force a dependency on maemo-pan (libicd-network-dummy package) being loaded.

Tap on the Connectivity icon in your status bar and either "Select a connection" or "Change connection" to see a list of available network access points. You should see one called "Dummy Network" (this name will likely change in future versions of maemo-pan, see bug #3306 for details).

To connect to the Internet through this connection you must make sure the "Internet Connection Sharing" application is running on your phone and has a connection. Select the "Dummy Network" from the tablet network list and enjoy anywhere Internet!

[edit] Sharing your connection over bluetooth [n900]

Using genwall for internet connection sharing over bluetooth, follow:(Linux/Windows).


Using udev to automatically setup internet connection sharing over bluetooth comes now.


A kernel with iptables support is needed,

Kernel Power is the recommended way to achieve this. see Kernel Power for installation details.

The default kernel with CSSU-thumb is also suitable.


Install the iptables package: 

apt-get install iptables

create the following 2 files:

/etc/udev/rules.d/98-bnep0.rules: 

ACTION=="add", SUBSYSTEM=="net",  KERNEL=="bnep0", RUN+="/etc/udev/bluenet.sh"
ACTION=="remove", SUBSYSTEM=="net",  KERNEL=="bnep0", RUN+="/etc/udev/bluenet.sh"

/etc/udev/bluenet.sh: 

#! /bin/sh
if [ $ACTION = "add" ]; then 
	echo 1 > /proc/sys/net/ipv4/ip_forward
	iptables -t nat -A POSTROUTING ! -o lo -j MASQUERADE
	ifconfig bnep0 192.168.3.1
	ifconfig bnep0 up
	/usr/sbin/dnsmasq -I lo -z -a 192.168.3.1 -F 192.168.3.64,192.168.3.127 -x /var/run/dnsmasq.pid.bnep0
else
	iptables -t nat -D POSTROUTING ! -o lo -j MASQUERADE
	if [ -f /var/run/dnsmasq.pid.bnep0 ]; then
		DNSMASQ_PID=`cat /var/run/dnsmasq.pid.bnep0`
		rm -f /var/run/dnsmasq.pid.bnep0
		kill $DNSMASQ_PID
       fi
fi

then set /etc/udev/bluenet.sh as executible: 

chmod +x /etc/udev/bluenet.sh

now whenever an authorised remote device makes a bluetooth pan (nap) connection iptables and dnsmasq are setup to allow that device access to the phones network. TODO: when no internet connection is active ask to set it up


[edit] Using PAN on older maemo5 pr3

In terminal cd /etc/udev/ then write vi bluenet.sh it will open /etc/udev/bluenet.sh press R and paste that code: 

#!/bin/sh
if [ $ACTION = "add" ]; then 
# by 9000 @ talk.maemo.org
# Prompt you to select the Internet connection. You may choose gprs or wifi
run-standalone.sh dbus-send --system --type=method_call --dest=com.nokia.icd_ui /com/nokia/icd_ui com.nokia.icd_u
# Selecting and establishing connection takes time
sleep 2
# Verbose mode. You can remove it when you're using widget to activate this script
set -x
IP_ADDR="192.168.3.1"
NETMASK="255.255.255.0"
DHCP_RANGE="192.168.3.60,192.168.3.70"
RUNFILE="/var/run/btpan_tethering.pid"
DNSMASQ="/usr/sbin/dnsmasq"
# Load modules
modprobe ipt_MASQUERADE
# flush old rules
iptables -F
iptables -t nat -F
iptables -t nat -A POSTROUTING -o wlan0 -j MASQUERADE
# forward IPs
echo 1 > /proc/sys/net/ipv4/ip_forward
# Setup bnep0
ifconfig bnep0 down
ifconfig bnep0 up
ifconfig bnep0 $IP_ADDR netmask $NETMASK up
# Setup DNS and DHCP
start-stop-daemon -S -p $RUNFILE -m -b -x $DNSMASQ -- -k -I lo -z -a $IP_ADDR -F $DHCP_RANGE -b
run-standalone.sh dbus-send --type=method_call --dest=org.freedesktop.Notifications /org/freedesktop/Notifications org.freedesktop.Notifications.SystemNoteInfoprint string:'Bluetooth PAN Activated'
fi

press esc, then :w to save file and :q to quit

set /etc/udev/bluenet.sh as executible: 

chmod +x /etc/udev/bluenet.sh

cd /etc/udev/rules.d/ command vi 98-bnep0.rules and press R

/etc/udev/rules.d/98-bnep0.rules copy that txt and paste it, esc and Save it with command :w quit vi editor :q : 

ACTION=="add", SUBSYSTEM=="net",  KERNEL=="bnep0", RUN+="/etc/udev/bluenet.sh"


It is possible to use PAN to share Internet connections via PAN between two Nokia devices. However, on older devices it is recommended to use Bluetooth DUN (dial-up networking), since this is the normal method which smartphones use to share Internet access over Bluetooth.


[edit] Bluetooth PANU

PANU is a client role for the PAN profile. Here's the way how to make it work.

Install bluez-test from SDK tools repository: 

echo 'deb http://repository.maemo.org/ fremantle/tools free non-free' >> /etc/apt/sources.list
apt-get install bluez-test

You may now remove or comment SDK repository: 

perl -pi -e 's,^(deb http://repository.maemo.org/ fremantle/tools .*)$,#\1,' /etc/apt/sources.list

And now you can use your N900 device as a bluetooth networking client. Below are some commands.

Connect to another bluetooth device that provides NAP service: 

pand -c <bdaddr>

List connections: 

pand -l

Remove connection: 

pand -k <bdaddr>
Retrieved from "http://bugs.maemo.org/Bluetooth_PAN"