User:Jebba/Flash

Contents

[edit] Try this before reflashing!

[edit] The easiest way

This may be the easiest way to debrick a device. Try this first:

  • take battery out
  • insert USB cable (to boot device with charging boot reason)
  • insert battery & put back cover back
  • remove USB cable


[edit] Debrick

Another more complicated way to restore your bricked device without reflashing...

[edit] Debrick without reflashing!

Try this before reflashing!


I have found a way to "de-brick" a device that does not require reflashing.

If your device is booting up and hung with the second dot lit, like: 

*  (*)  *  *  *

this may solve your problem.

1) Get the proprietary (gah!) Nokia firmware flashing program.

2) Power off your phone.

3) Hold down "u" on your fone and plug the USB cable into your phone and your GNU/Linux laptop. This will put it in the same mode as you need when you are flashing it.

4) Run this command as root (or preface with "sudo"). It will only take a second or two. 

./flasher-3.5 --enable-rd-mode

5) Unplug cables and your system will reboot (or poweroff).

6) Boot up your system, it is now in R&D mode. :) It will (possibly?) prompt you to enter time/data again.

7) Now that everything is fine, power off the system normally again. DO NOT LEAVE YOUR SYSTEM IN R&D MODE, as it eats babies.

8) With your phone powered off hold down "u" on the phone, and plug in the USB cables to the phone and your GNU/Linux laptop.

9) Run this command as root (or preface with "sudo"). It will only take a second or two. 

./flasher-3.5 --disable-rd-mode

10) Unplug cables and your system will reboot (or poweroff).

11) Boot up your system, it is now recovered and NO DATA LOSS! Yippeee.


More info

Photos of what the hang looks like using a kernel that has the framebuffer console enabled: [1]


Some bugs, maybe related: [2] [3]


If you found this post helpful, please vote for this bug: [4]


[edit] Too mucha programmaz

I bricked my N900 (December 3rd) by adding the extras-testing + extras-devel repos and then installing lots of applications. I hit 100% on / (root filesystem) and on reboot the system hung at the "dots" part, ala: 

  * (*) * * *

I had filled up to 100% a number of times before and rebooting the phone had cleared up space (e.g. 100% full before reboot, 96% full after reboot). This is likely because 5% or so is reserved for root. Anyway, the most recent time it didn't come back alive...

[edit] Gah, bricked again

I was "participating" in the "Bug day", when someone suggested installing gettext to look at translations. I installed this, but got up to 99% full. I then did an `apt-get clean` to empty the cache and this dropped me to 98% full. I've often booted gnulinux boxes with 99% (or even 100%) full, so I figured 98% was fine. I wanted to reboot because often when you reboot the N900, you get space freed, due to the icon cache being liberated. Anyway, on reboot, I got a brick exactly as described above with the second dot more lit than the others (which I have seen reported by others): 

  * (*) * * *

This time I have my handy kernel with a console, so I can actually see WTF is going on. The images here show some details. In sum, things booted up and the root filesystem check went fine. Then it got an error right after "Freeing Init memory 152K" like this: 

getbootstate: Unexpected reset count 50 exceeds maximum (51)
getbootstate: Entering state 'MALF'.
getbootstate: Houston, we have a problem, powering off...

The /sbin/getbootstate program is in the package "getbootstate". But look at this and hold back the tears: 

[sbox-FREMANTLE_ARMEL: ~/getbootstate] > apt-get source getbootstate
Reading package lists... Done
Building dependency tree... Done
E: Unable to find a source package for getbootstate

The getbootstate package appears to be closed source. :( That pretty much ends the debugging and my bug day. Gah.

[edit] Flashing N900 with 0xFFFF

Many parts of the N900 are Free Software, but lamentably, many parts are still closed proprietary shit. Nokia's maemo_flasher program is an example of a closed application that Nokia makes for use with the N900. I understand why some parts of their suite are still closed (e.g. pre-ofono GSM stack), but why the flasher has to be closed I have no idea. Gar.

Thankfully, there is The 0pen Free Fiasco Firmware Flasher, which is designed for flashing Nokia tablets and is Free Software (GPLv3). Unfortunately, 0xFFFF doesn't work with the N900. There is some progress to support the device. You can grab the most recent code from the mercurial repository thusly: 

hg clone http://hg.youterm.com/0xFFFF

I sent the author of 0xFFFF the output of my crash. Hopefully it will soon be a usable tool for flashing the N900. I built RPMs for Fedora 12 x86_64 running the latest mercurial code--the ones in the Fedora repo aren't even the lastest tarball release (0.3.9 vs. 0.4.0).

[edit] 0xFFFF for Fedora

  • NOTE: recently I checked out the code via Mercurial and saw that the 0xFFFF developer has added much more N900 specific code, but I haven't tried it yet.
  • UPDATE: I have built the latest and greatest code of 0xFFFF from today and made a Fedora 12 package. You can grab it here:

Binary:

Source:

  • The 0xFFFF GUI uses gtkamlc. This is not packaged in Fedora. I built it, but compiling the GUI is still barfing.

[edit] Flashing with Nokia's Proprietary maemo_flasher

I now have ONE non-free program installed on my computer  :( It's the only way I know how to debrick the phone.

See also: Updating tablet firmware on this wiki. 

yum -y install glibc.i686 libusb.i686
  • Untar the files....
  • Power off phone and unplug USB.
  • Hold down "u" on N900 keyboard and plug in USB cable between computer and N900. A USB icon will appear in the upper right corner--you can let go of "u" on the keyboard at this point.
  • Run this as root: 
./flasher-3.5 -F ~/devel/maemo/FLASH/RX-51_2009SE_1.2009.42-11_PR_COMBINED_MR0_ARM.bin -f -R
  • Done.

[edit] Info from flasher

sudo ./flasher-3.5 --query-rd-mode
flasher v2.5.2 (Oct 21 2009)

USB device found found at bus 002, device address 008.
Found device RX-51, hardware revision 2101
NOLO version 1.4.13
Version of 'sw-release': RX-51_2009SE_1.2009.42-11_PR_MR0
The device is in production mode

[edit] Unpacking flash image

$ mkdir RX-51_2009SE_1.2009.42-11_PR_COMBINED_MR0_ARM-UNPACKED

$ cd RX-51_2009SE_1.2009.42-11_PR_COMBINED_MR0_ARM-UNPACKED/

$ sudo flasher-3.5 -u -F ../RX-51_2009SE_1.2009.42-11_PR_COMBINED_MR0_ARM.bin
Retrieved from "http://bugs.maemo.org/User:Jebba/Flash"