Documentation/Maemo 5 Developer Guide/DBus/Using GLib Wrappers For D-Bus
Contents |
[edit] Introduction to GObjects
To support the runtime binding of GTK+ widgets to interpreted languages, a complicated system for implementing object-oriented machinery for C was developed. Depending on the particular viewpoint, this system is either called GObject
or GType
. GType
is the low-level runtime type system, which is used to implement GObject
s, and GObject
s are the implementations of objects using the GType
framework. For a short introduction about GObject
s, please see the Wikipedia entry on GType. GObject
/GType
is part of GLib, but most of GLib is useable without the GType
part of the library. In fact, the GObject
/GType
functionality is separated into its own library (libgobject
).
The following example uses the GType
to implement a very simple object that is published over the D-Bus. This also means that some of the inherent complexity involved in implementing a fully-fledged GObject
can be forgone. For this reason, while the object is usable over the D-Bus, it may not have all the support required for using it directly as a GObject
(full dynamic type registration and properties are missing).
The implementation is a simple non-inheriting stand-alone class, implementing an interface to access and modify two private members: value1
and value2
, the first of which is an 32-bit signed integer, and the second a gdouble
.
The per-class constructor and the per-object constructor must be implemented. Both of these are quite short for the first version of the implementation.
[edit] D-Bus Interface Definition Using XML
Because the primary objective here is to make the object available over D-Bus, the example starts by covering one of the easiest way of achieving this: the dbus-bindings-tool. The tool generates a lot of the bindings code for both the client and server side. As input the uses an XML file describing the interface for the service that is being implemented.
The first step is to describe one method in XML. Each method is described with a separate method element, whose name attribute is the name of the method to be generated (this name is copied into the generated stub code automatically by the tool). The first method is setvalue1
, which gets one argument, new_value
, which is an 32-bit signed integer: glib-dbus-sync/value-dbus-interface.xml
<!-- setvalue1(int newValue): sets value1 --> <method name="setvalue1"> <arg type="i" name="new_value" direction="in"/> </method>
Define each argument explicitly with the arg element. The type attribute is required because it defines the data type for the argument. Arguments are sometimes called parameters when they are used with D-Bus methods. Each argument needs to specify the "direction" of the argument. Parameters for method calls are "going into" the service, hence the correct content for the direction attribute is in. Return values from method calls are "coming out" of the service. Hence, their direction is out. If a method call does not return any value (returns void
), no argument with the direction out needs to be specified.
D-Bus by itself does not limit the number of return arguments. C language supports only one return value from a function, but a lot of the higher level languages do not have this restriction.
The following argument types are supported for D-Bus methods (with respective closest types in GLib):
-
b
: boolean (gboolean
) -
y
: 8-bit unsigned integer (guint8
) -
q
/n
: 16-bit unsigned/signed integer (guint16
/gint16
) -
u
/i
: 32-bit unsigned/signed integer (guint32
/gint32
) -
t
/x
: 64-bit unsigned/signed integer (guint64
/gint64
) -
d
: IEEE 754 double precision floating point number (gdouble
) -
s
: UTF-8 encoded text string withNULL
termination (only oneNULL
allowed) (gchar*
with additional restrictions) -
a
: Array of the following type specification (case-dependent) -
o
/g
/r
/(/)
/v
/e
//: Complex types, please see the official D-Bus documentation on type signatures.
From the above list, it can be seen that setvalue1 accepts one 32-bit signed integer argument (new_value
). The name of the argument affects the generated stub code prototypes (not the implementation), but is quite useful for documentation, and also for D-Bus introspection.
The next step is the interface specification of another method: getvalue1
, which returns the current integer value of the object. It has no method call parameters (no arguments with direction="in"), and only returns one 32-bit signed integer: glib-dbus-sync/value-dbus-interface.xml
<!-- getvalue1(): returns the first value (int) --> <method name="getvalue1"> <arg type="i" name="cur_value" direction="out"/> </method>
Naming of the return arguments is also supported in D-Bus (as above). This does not influence the generated stub code, but serves as additional documentation.
Bind the methods to a specific (D-Bus) interface by placing the method elements within an interface element. The interface name attribute is optional but recommended, otherwise the interface is unnamed and provides less useful information on introspection.
Multiple interfaces can be implemented in the same object, and if this is the case, the multiple interface elements are listed within the node element. The node element is the "top-level" element. In this case, only one explicit interface is implemented (the binding tools add the introspection interfaces automatically, so specifying them is not necessary in the XML). And so, the result is the minimum required interface XML file: glib-dbus-sync/value-dbus-interface.xml
<?xml version="1.0" encoding="UTF-8" ?> <node> <interface name="org.maemo.Value"> <!-- getvalue1(): returns the first value (int) --> <method name="getvalue1"> <arg type="i" name="cur_value" direction="out"/> </method> <!-- setvalue1(int newValue): sets value1 --> <method name="setvalue1"> <arg type="i" name="new_value" direction="in"/> </method> </interface> </node>
Extend the minimal interface specification by adding the correct reference to the proper DTD. This allows validation tools to work automatically with the XML file. Methods are also added to manipulate the second value. The full interface file now contains comments, describing the purpose of the interface and the methods. This is highly recommended, if publishing the interface is planned at some point, as the bare XML does not carry semantic information. glib-dbus-sync/value-dbus-interface.xml
<?xml version="1.0" encoding="UTF-8" ?> <!-- This Maemo code example is licensed under a MIT-style license, that can be found in the file called "License" in the same directory as this file. Copyright (c) 2007-2009 Nokia Corporation. All rights reserved. --> <!-- If you keep the following DOCTYPE tag in your interface specification, xmllint can fetch the DTD over the Internet for validation automatically. --> <!DOCTYPE node PUBLIC "-//freedesktop//DTD D-Bus Object Introspection 1.0//EN" "http://standards.freedesktop.org/dbus/1.0/introspect.dtd"> <!-- This file defines the D-Bus interface for a simple object, that holds a simple state consisting of two values (one a 32-bit integer, the other a double). The interface name is "org.maemo.Value". One known reference implementation is provided for it by the "/GlobalValue" object found via a well-known name of "org.maemo.Platdev_ex". --> <node> <interface name="org.maemo.Value"> <!-- Method definitions --> <!-- getvalue1(): returns the first value (int) --> <method name="getvalue1"> <!-- NOTE Naming arguments is not mandatory, but is recommended so that D-Bus introspection tools are more useful. Otherwise the arguments are automatically named "arg0", "arg1" and so on. --> <arg type="i" name="cur_value" direction="out"/> </method> <!-- getvalue2(): returns the second value (double) --> <method name="getvalue2"> <arg type="d" name="cur_value" direction="out"/> </method> <!-- setvalue1(int newValue): sets value1 --> <method name="setvalue1"> <arg type="i" name="new_value" direction="in"/> </method> <!-- setvalue2(double newValue): sets value2 --> <method name="setvalue2"> <arg type="d" name="new_value" direction="in"/> </method> </interface> </node>
When dealing with automatic code generation, it is quite useful to also automate testing of the "source files" (in this case, XML). One important validation technique for XML is verifying for well-formedness (all XML files need to satisfy the rules in XML spec 1.0), another is validating the structure of XML (that elements are nested correctly, that only correct elements are present and that the element attributes and data are legal). Structural validation rules are described by a DTD (Document Type Definition) document for the XML format that the file is supposed to adhere to. The DTD is specified in the XML, within the DOCTYPE
processing directive.
This is still not perfect, because DTD validation can only check for syntax and structure, but not for meaning or semantics.
The next step is to add a target called checkxml
to the Makefile
, so that it can be run whenever the validity of the interface XML is to be checked. glib-dbus-sync/Makefile
# One extra target (which requires xmllint, from package libxml2-utils) # is available to verify the well-formedness and the structure of the # interface definition xml file. # # Use the 'checkxml' target to run the interface XML through xmllint # verification. You need to be connected to the Internet in order # for xmllint to retrieve the DTD from fd.o (unless you setup local # catalogs, which are not covered here). # ... Listing cut for brevity ... # Interface XML name (used in multiple targets) interface_xml := value-dbus-interface.xml # ... Listing cut for brevity ... # Special target to run DTD validation on the interface XML. Not run # automatically (since xmllint is not always available and also needs # Internet connectivity). checkxml: $(interface_xml) @xmllint -valid -noout $< @echo $< checks out ok
[sbox-DIABLO_X86: ~/glib-dbus-sync] > make checkxml value-dbus-interface.xml checks out ok
Just to demonstrate what kind of error messages to expect when there are problems in the XML, the valid interface specification is modified slightly by adding one invalid element (invalidElement
), and by removing one starting tag (method).
[sbox-DIABLO_X86: ~/glib-dbus-sync] > make checkxml value-dbus-interface.xml:36: element invalidElement: validity error : No declaration for element invalidElement </invalidElement> ^ value-dbus-interface.xml:53: parser error : Opening and ending tag mismatch: method line 39 and interface </interface> ^ value-dbus-interface.xml:54: parser error : Opening and ending tag mismatch: interface line 22 and node </node> ^ value-dbus-interface.xml:55: parser error : Premature end of data in tag node line 21 ^ make: *** [checkxml] Error 1
The first error (validity error) is detected, because the file does not adhere to the DTD. The other errors (parser errors) are detected, because the file is no longer a well-formed XML document.
If the makefile targets depend on checkxml
, the validation can be integrated into the process of the build. However, it is not always the best solution.
[edit] Generating Automatic Stub Code
The following step is to generate the "glue" code that implements the mapping from GLib into D-Bus. The generated code is used later on, but it is useful to see at this point what the dbus-binding-tool
program generates.
Expand the Makefile
to invoke the tool whenever the interface XML changes and store the resulting glue code separately for both the client and server. glib-dbus-sync/Makefile
# Define a list of generated files so that they can be cleaned as well cleanfiles := value-client-stub.h \ value-server-stub.h # ... Listing cut for brevity ... # If the interface XML changes, the respective stub interfaces are # automatically regenerated. Normally this also means that your # builds fail after this because you are missing implementation # code. value-server-stub.h: $(interface_xml) dbus-binding-tool --prefix=value_object --mode=glib-server \ $< > $@ value-client-stub.h: $(interface_xml) dbus-binding-tool --prefix=value_object --mode=glib-client \ $< > $@ # ... Listing cut for brevity ... clean: $(RM) $(targets) $(cleanfiles) *.o
Pass two parameters for the dbus-binding-tool
program. Use the --prefix
parameter to tell which text is prefixed to all generated structure and function names. This helps to avoid namespace collisions when pulling the generated glue files back into the programs. The value_object
is used because it seems like a logical prefix for the project. Use a prefix that is not used in the code (even in the object implementation in server). This way, there is no risk of reusing the same names that are generated with the tool.
The second parameter selects what kind of output the tool generates. At the moment, the tool only supports generating GLib/D-Bus bindings, but this might change in the future. Furthermore, select which "side" of the D-Bus the bindings are generated for. The -client side is for code that wishes to use GLib to access the Value object implementation over D-Bus. The -server side is respectively for the implementation of the Value object.
Running the tool results in the following two header files:
[sbox-DIABLO_X86: ~/glib-dbus-sync] > make value-server-stub.h value-client-stub.h dbus-binding-tool --prefix=value_object --mode=glib-server \ value-dbus-interface.xml > value-server-stub.h dbus-binding-tool --prefix=value_object --mode=glib-client \ value-dbus-interface.xml > value-client-stub.h [sbox-DIABLO_X86: ~/glib-dbus-sync] > ls -la value*stub.h -rw-rw-r-- 1 user user 5184 Nov 21 14:02 value-client-stub.h -rw-rw-r-- 1 user user 10603 Nov 21 14:02 value-server-stub.h
Check what the tool produced, starting with the server stub file: glib-dbus-sync/value-server-stub.h
/* Generated by dbus-binding-tool; do not edit! */ /*... Listing cut for brevity ...*/ #include <dbus/dbus-glib.h> static const DBusGMethodInfo dbus_glib_value_object_methods[] = { { (GCallback) value_object_getvalue1, dbus_glib_marshal_value_object_BOOLEAN__POINTER_POINTER, 0 }, { (GCallback) value_object_getvalue2, dbus_glib_marshal_value_object_BOOLEAN__POINTER_POINTER, 47 }, { (GCallback) value_object_setvalue1, dbus_glib_marshal_value_object_BOOLEAN__INT_POINTER, 94 }, { (GCallback) value_object_setvalue2, dbus_glib_marshal_value_object_BOOLEAN__DOUBLE_POINTER, 137 }, }; const DBusGObjectInfo dbus_glib_value_object_object_info = { 0, dbus_glib_value_object_methods, 4, "org.maemo.Value\0getvalue1\0S\0cur_value\0O\0F\0N\0i\0\0" "org.maemo.Value\0getvalue2\0S\0cur_value\0O\0F\0N\0d\0\0" "org.maemo.Value\0setvalue1\0S\0new_value\0I\0i\0\0" "org.maemo.Value\0setvalue2\0S\0new_value\0I\0d\0\0\0", "\0", "\0" };
The interest here lies in the method table, mainly because it lists the names of the functions that must be implemented: value_object_getvalue1
, 0_object_getvalue2
, value_object_setvalue1
and value_object_setvalue2
. Each entry in the table consists of a function address, and the function to use to marshal data from/to GLib/D-Bus (the functions that start with dbus_glib_marshal_*
). The marshaling functions are defined in the same file, but were omitted from the listing above.
Marshaling in its most generic form means the conversion of parameters or arguments from one format to another, to make two different parameter passing conventions compatible. It is a common feature found in almost all RPC mechanisms. Because GLib has its own type system and a D-Bus of its own, it is very tedious to write the conversion code manually. This is where the binding generation tool really helps.
The other interesting feature of the above listing is the _object_info
structure. The structure is passed to the D-Bus daemon when the object is ready to be published on the bus (so that clients may invoke methods on it). The very long string (that contains binary zeros) is the compact format of the interface specification. Similarities can be seen between the names in the string and the names of the interface, methods and arguments that were declared in the XML. The structure is also an important part of the D-Bus introspection mechanism.
As the snippet says at the very first line, do not edit it manually. This holds true while using the XML file as the source of an interface. It is also possible to use the XML only once, when starting the project, and then just start copy-pasting the generated glue code around, while discarding the XML file and dbus-binding-tool
. Needless to say, this makes maintenance of the interface much more difficult and is not really recommended. The generated stub code is not edited in this material.
The example continues next with the server implementation for the functions that are called via the method table.
[edit] Creating Simple GObject for D-Bus
The starting point here is with the per-instance and per-class state structures for the object. The per-class structure contains only the bare minimum contents, which are required from all classes in GObject
. The per-instance structure contains the required "parent object" state (GObject
), but also includes the two internal values (value1
and value2
), with which the rest of this example is concerned: glib-dbus-sync/server.c
/* This defines the per-instance state. Each GObject must start with the 'parent' definition so that common operations that all GObjects support can be called on it. */ typedef struct { /* The parent class object state. */ GObject parent; /* Our first per-object state variable. */ gint value1; /* Our second per-object state variable. */ gdouble value2; } ValueObject; /* Per class state. For the first Value implementation we only have the bare minimum, that is, the common implementation for any GObject class. */ typedef struct { /* The parent class state. */ GObjectClass parent; } ValueObjectClass;
The convenience macros are defined in a way expected for all GType
s. The G_TYPE_
macros are defined in GType
and include the magic by which the object implementation does not need to know much about the internal specifics of GType
. The GType
macros are described in the GObject API reference for GType.
Some of the macros are used internally in this implementation later on. glib-dbus-sync/server.c
/* Forward declaration of the function that returns the GType of the Value implementation. Not used in this program because we only need to push this over the D-Bus. */ GType value_object_get_type(void); /* Macro for the above. It is common to define macros using the naming convention (seen below) for all GType implementations, and that is why we are going to do that here as well. */ #define VALUE_TYPE_OBJECT (value_object_get_type()) #define VALUE_OBJECT(object) \ (G_TYPE_CHECK_INSTANCE_CAST((object), \ VALUE_TYPE_OBJECT, ValueObject)) #define VALUE_OBJECT_CLASS(klass) \ (G_TYPE_CHECK_CLASS_CAST((klass), \ VALUE_TYPE_OBJECT, ValueObjectClass)) #define VALUE_IS_OBJECT(object) \ (G_TYPE_CHECK_INSTANCE_TYPE((object), \ VALUE_TYPE_OBJECT)) #define VALUE_IS_OBJECT_CLASS(klass) \ (G_TYPE_CHECK_CLASS_TYPE((klass), \ VALUE_TYPE_OBJECT)) #define VALUE_OBJECT_GET_CLASS(obj) \ (G_TYPE_INSTANCE_GET_CLASS((obj), \ VALUE_TYPE_OBJECT, ValueObjectClass)) /* Utility macro to define the value_object GType structure. */ G_DEFINE_TYPE(ValueObject, value_object, G_TYPE_OBJECT)
The dbus_g_object_type_install_info
function takes a pointer to the structure describing the D-Bus integration (dbus_glib_value_object_object_info
), which is generated by dbus-bindings-tool
. This function creates all the necessary runtime information for the GType
, so the details can be left alone. It also attaches the introspection data to the GType
, so that D-Bus introspection may return information on the interface that the object implements.
The next functions to be implemented are the get and set functions, which allow us to inspect the interface as well. The names of the functions and their prototypes are ultimately dictated by dbus-bindings-tool
generated stub header files. This means that if the interface XML is sufficiently changed, the code fails to build (because the generated stubs yield different prototypes): glib-dbus-sync/server.c
/** * Function that gets called when someone tries to execute "setvalue1" * over the D-Bus. (Actually the marshaling code from the stubs gets * executed first, but they eventually execute this function.) * * NOTE: If you change the name of this function, the generated * stubs no longer find it! On the other hand, if you * decide to modify the interface XML, this is one of the places * that you have to modify as well. * This applies to the next four functions (including this one). */ gboolean value_object_setvalue1(ValueObject* obj, gint valueIn, GError** error) { dbg("Called (valueIn=%d)", valueIn); g_assert(obj != NULL); /* Change the value. */ obj->value1 = valueIn; /* Return success to GLib/D-Bus wrappers. In this case we do not need to touch the supplied error pointer-pointer. */ return TRUE; } /** * Function that gets executed on "setvalue2". * Other than this function operating with different type input * parameter (and different internal value), all the comments from * set_value1 apply here as well. */ gboolean value_object_setvalue2(ValueObject* obj, gdouble valueIn, GError** error) { dbg("Called (valueIn=%.3f)", valueIn); g_assert(obj != NULL); obj->value2 = valueIn; return TRUE; } /** * Function that gets executed on "getvalue1". */ gboolean value_object_getvalue1(ValueObject* obj, gint* valueOut, GError** error) { dbg("Called (internal value1 is %d)", obj->value1); g_assert(obj != NULL); /* Check that the target pointer is not NULL. Even if the only caller for this is the GLib-wrapper code, we cannot trust the stub generated code and should handle the situation. We terminate with an error in this case. Another option is to create a new GError, and store the error condition there. */ g_assert(valueOut != NULL); /* Copy the current first value to caller specified memory. */ *valueOut = obj->value1; /* Return success. */ return TRUE; } /** * Function that gets executed on "getvalue2". * (Again, similar to "getvalue1"). */ gboolean value_object_getvalue2(ValueObject* obj, gdouble* valueOut, GError** error) { dbg("Called (internal value2 is %.3f)", obj->value2); g_assert(obj != NULL); g_assert(valueOut != NULL); *valueOut = obj->value2; return TRUE; }
The GLib/D-Bus wrapper logic implements all the necessary parameter conversion from D-Bus into the functions, so it is only necessary to handle the GLib corresponding types (gint
and gdouble
). The method implementations always receive an object reference to the object as their first parameter, and a pointer to a place where to store new GError
objects if the method decides that an error should be created. This error is then to be propagated back to the caller of the D-Bus method. This simple get/set example never sets errors, so the last parameter can be ignored here.
Do not return the values in the conventional C way (by using return someVal
), but instead the return values are written using the given pointers. The return value of the method is always a gboolean
, signifying either success or failure. If failure (FALSE
) is returned, create and setup a GError
object, and store its address to the error location.
[edit] Publishing GType on D-Bus
Once the implementation is complete, an instance of the class must be published onto the D-Bus. This is done inside the main of the server example and involves performing a D-Bus method call on the bus.
To ensure that the server and the client do not have to be changed, if the object or well-known names are changed later, the server and the client are put into a common header file that is used by both: glib-dbus-sync/common-defs.h
/* Well-known name for this service. */ #define VALUE_SERVICE_NAME "org.maemo.Platdev_ex" /* Object path to the provided object. */ #define VALUE_SERVICE_OBJECT_PATH "/GlobalValue" /* And we are interested in using it through this interface. This must match the entry in the interface definition XML. */ #define VALUE_SERVICE_INTERFACE "org.maemo.Value"
The decision to use /GlobalValue
as the object path is based on clarity only. Most of the time something like /org/maemo/Value
is used instead.
Before using any of the GType
functions, the runtime system must be initialized by calling g_type_init
. This creates the built-in types and sets up all the machinery necessary for creating custom types. When using GTK+, the function is called automatically if GTK+ is initialized. Because this example only uses GLib, the function must be called manually.
After initializing the GType
system, the next step is to open a connection to the session bus, which is used for the remainder of the publishing sequence: glib-dbus-sync/server.c
/* Pull symbolic constants that are shared (in this example) between the client and the server. */ #include "common-defs.h" /*... Listing cut for brevity ...*/ int main(int argc, char** argv) { /*... Listing cut for brevity ...*/ /* Initialize the GType/GObject system. */ g_type_init(); /*... Listing cut for brevity ...*/ g_print(PROGNAME ":main Connecting to the Session D-Bus.\n"); bus = dbus_g_bus_get(DBUS_BUS_SESSION, &error); if (error != NULL) { /* Print error and terminate. */ handleError("Could not connect to session bus", error->message, TRUE); }
For prospective clients to find the object on the session bus, attach the server to a well-known name by using the RequestName
method call on the D-Bus server (over D-Bus). To target the server, create a GLib/D-Bus proxy object first: glib-dbus-sync/server.c
g_print(PROGNAME ":main Registering the well-known name (%s)\n", VALUE_SERVICE_NAME); /* In order to register a well-known name, we need to use the "RequestMethod" of the /org/freedesktop/DBus interface. Each bus provides an object that implements this interface. In order to do the call, we need a proxy object first. DBUS_SERVICE_DBUS = "org.freedesktop.DBus" DBUS_PATH_DBUS = "/org/freedesktop/DBus" DBUS_INTERFACE_DBUS = "org.freedesktop.DBus" */ busProxy = dbus_g_proxy_new_for_name(bus, DBUS_SERVICE_DBUS, DBUS_PATH_DBUS, DBUS_INTERFACE_DBUS); if (busProxy == NULL) { handleError("Failed to get a proxy for D-Bus", "Unknown(dbus_g_proxy_new_for_name)", TRUE); } /* Attempt to register the well-known name. The RPC call requires two parameters: - arg0: (D-Bus STRING): name to request - arg1: (D-Bus UINT32): flags for registration. (please see "org.freedesktop.DBus.RequestName" in http://dbus.freedesktop.org/doc/dbus-specification.html) Returns one uint32 giving the result of the RPC call. We are interested in 1 (we are now the primary owner of the name) or 4 (we were already the owner of the name, however in this application it does not make much sense). The function returns FALSE if it sets the GError. */ if (!dbus_g_proxy_call(busProxy, /* Method name to call. */ "RequestName", /* Where to store the GError. */ &error, /* Parameter type of argument 0. Note that because we are dealing with GLib/D-Bus wrappers, you need to find a suitable GType instead of using the "native" D-Bus type codes. */ G_TYPE_STRING, /* Data of argument 0. In our case, this is the well-known name for our server example ("org.maemo.Platdev_ex"). */ VALUE_SERVICE_NAME, /* Parameter type of argument 1. */ G_TYPE_UINT, /* Data of argument 0. This is the "flags" argument of the "RequestName" method which can be use to specify what the bus service should do when the name already exists on the bus. We go with defaults. */ 0, /* Input arguments are terminated with a special GType marker. */ G_TYPE_INVALID, /* Parameter type of return value 0. For "RequestName" it is UINT32 so we pick the GType that maps into UINT32 in the wrappers. */ G_TYPE_UINT, /* Data of return value 0. These are always pointers to the locations where the proxy can copy the results. */ &result, /* Terminate list of return values. */ G_TYPE_INVALID)) { handleError("D-Bus.RequestName RPC failed", error->message, TRUE); /* Note that the whole call failed, not "just" the name registration (we deal with that below). This means that something bad probably has happened and there is not much we can do (hence program termination). */ } /* Check the result code of the registration RPC. */ g_print(PROGNAME ":main RequestName returned %d.\n", result); if (result != 1) { handleError("Failed to get the primary well-known name.", "RequestName result != 1", TRUE); /* In this case we could also continue instead of terminating. We could retry the RPC later. Or "lurk" on the bus waiting for someone to tell us what to do. If we were publishing multiple services and/or interfaces, it even might make sense to continue with the rest anyway. In our simple program, we terminate. Not much left to do for this poor program if the clients are not able to find the Value object using the well-known name. */ }
The dbus_g_proxy_call
function is used to do synchronous method calls in GLib/D-Bus wrappers, and in this case, it is used to run the two argument RequestName
method call. The method returns one value (and uint32
), which encodes the result of the well-known name registration.
Be careful with the order and correctness of the parameters to the function call, as it is easy to get something wrong, and the C compiler cannot really check for parameter type validity here.
After the successful name registration, an instance of the ValueObject
is created and published on the D-Bus: glib-dbus-sync/server.c
g_print(PROGNAME ":main Creating one Value object.\n"); /* The NULL at the end means that we have stopped listing the property names and their values that had been used to set the properties to initial values. Our simple Value implementation does not support GObject properties, and also does not inherit anything interesting from GObject directly, so there are no properties to set. For more examples on properties see the first GTK+ example programs from the maemo Application Development material. NOTE: You need to keep at least one reference to the published object at all times, unless you want it to disappear from the D-Bus (implied by API reference for dbus_g_connection_register_g_object(). */ valueObj = g_object_new(VALUE_TYPE_OBJECT, NULL); if (valueObj == NULL) { handleError("Failed to create one Value instance.", "Unknown(OOM?)", TRUE); } g_print(PROGNAME ":main Registering it on the D-Bus.\n"); /* The function does not return any status, so can not check for errors here. */ dbus_g_connection_register_g_object(bus, VALUE_SERVICE_OBJECT_PATH, G_OBJECT(valueObj)); g_print(PROGNAME ":main Ready to serve requests (daemonizing).\n"); /*... Listing cut for brevity ...*/ }
After this, the main enters into the main loop, and serves client requests coming over the D-Bus, until the server is terminated.
All callback registration is performed automatically by the GLib/D-Bus wrappers on object publication, so there is no need to worry about them.
Implementing the dependencies and rules for the server and the generated stub code gives this snippet: glib-dbus-sync/Makefile
server: server.o $(CC) $^ -o $@ $(LDFLAGS) # ... Listing cut for brevity ... # The server and client depend on the respective implementation source # files, but also on the common interface as well as the generated # stub interfaces. server.o: server.c common-defs.h value-server-stub.h $(CC) $(CFLAGS) -DPROGNAME=\"$(basename $@)\" -c $< -o $@
When implementing makefiles that separate compilation from linking, passing the target name (automatic variable $@
) directly is not possible as the PROGNAME
-define (because that expands into server.o
, and it would look slightly silly if all the messages were prefixed with the name). Instead, use a GNU make function (basename
) to strip any prefixes and suffixes out of the parameter. This way, the PROGNAME
is set to server.
The next step is to build the server and start it:
[sbox-DIABLO_X86: ~/glib-dbus-sync] > make server dbus-binding-tool --prefix=value_object --mode=glib-server \ value-dbus-interface.xml > value-server-stub.h cc -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -g -Wall -DG_DISABLE_DEPRECATED -DNO_DAEMON -DPROGNAME=\"server\" -c server.c -o server.o cc server.o -o server -ldbus-glib-1 -ldbus-1 -lgobject-2.0 -lglib-2.0 [sbox-DIABLO_X86: ~/glib-dbus-sync] > run-standalone.sh ./server server:main Connecting to the Session D-Bus. server:main Registering the well-known name (org.maemo.Platdev_ex) server:main RequestName returned 1. server:main Creating one Value object. server:value_object_class_init: Called server:value_object_class_init: Binding to GLib/D-Bus server:value_object_class_init: Done server:value_object_init: Called server:main Registering it on the D-Bus. server:main Ready to serve requests (daemonizing). server: Not daemonizing (built with NO_DAEMON-build define)
After this, use dbus-send
to test out the implementation details from the server. This is done in the same session (for simplicity) by first suspending the server with Ctrl+z, and then continuing running it with the bg
shell built-in command. This is done so that it is easier to see the reaction of the server to each dbus-send command.
The first step here is to test the getvalue1
and setvalue1
methods:
[Ctrl+z] [1]+ Stopped run-standalone.sh ./server [sbox-DIABLO_X86: ~/glib-dbus-sync] > bg [1]+ run-standalone.sh ./server & [sbox-DIABLO_X86: ~/glib-dbus-sync] > run-standalone.sh dbus-send \ --type=method_call --print-reply --dest=org.maemo.Platdev_ex \ /GlobalValue org.maemo.Value.getvalue1 server:value_object_getvalue1: Called (internal value1 is 0) method return sender=:1.15 -> dest=:1.20 int32 0 [sbox-DIABLO_X86: ~/glib-dbus-sync] > run-standalone.sh dbus-send \ --type=method_call --print-reply --dest=org.maemo.Platdev_ex \ /GlobalValue org.maemo.Value.setvalue1 int32:5 server:value_object_setvalue1: Called (valueIn=5) method return sender=:1.15 -> dest=:1.21 [sbox-DIABLO_X86: ~/glib-dbus-sync] > run-standalone.sh dbus-send \ --type=method_call --print-reply --dest=org.maemo.Platdev_ex \ /GlobalValue org.maemo.Value.getvalue1 server:value_object_getvalue1: Called (internal value1 is 5) method return sender=:1.15 -> dest=:1.22 int32 5
The next step is to test the double state variable with getvalue2
and setvalue2
methods:
[sbox-DIABLO_X86: ~/glib-dbus-sync] > run-standalone.sh dbus-send \ --type=method_call --print-reply --dest=org.maemo.Platdev_ex \ /GlobalValue org.maemo.Value.getvalue2 server:value_object_getvalue2: Called (internal value2 is 0.000) method return sender=:1.15 -> dest=:1.23 double 0 [sbox-DIABLO_X86: ~/glib-dbus-sync] > run-standalone.sh dbus-send \ --type=method_call --print-reply --dest=org.maemo.Platdev_ex \ /GlobalValue org.maemo.Value.setvalue2 double:42.0 server:value_object_setvalue2: Called (valueIn=42.000) method return sender=:1.15 -> dest=:1.24 [sbox-DIABLO_X86: ~/glib-dbus-sync] > run-standalone.sh dbus-send \ --type=method_call --print-reply --dest=org.maemo.Platdev_ex \ /GlobalValue org.maemo.Value.getvalue2 server:value_object_getvalue2: Called (internal value2 is 42.000) method return sender=:1.15 -> dest=:1.25 double 42
This results in a fully functional D-Bus service implementation, although a very simple one.
The next step is to utilize the service from a client.
[edit] Using GLib/D-Bus Wrapper from Client
By using the generated client stub file, the client that invokes the methods on the Value object can now be written. The D-Bus method calls can also be performed "manually" (either with GLib/D-Bus functions, or even by using libdbus directly, but the latter is discouraged).
The dbus-bindings-tool
(when run with the --mode=glib-client
parameter) generates functions for each of the interface methods, and the functions handle data marshaling operations internally.
Two generated stub functions are presented below, and they are used shortly: glib-dbus-sync/value-client-stub.h
/* Generated by dbus-binding-tool; do not edit! */ /*... Listing cut for brevity ...*/ static #ifdef G_HAVE_INLINE inline #endif gboolean org_maemo_Value_getvalue1 (DBusGProxy *proxy, gint* OUT_cur_value, GError **error) { return dbus_g_proxy_call (proxy, "getvalue1", error, G_TYPE_INVALID, G_TYPE_INT, OUT_cur_value, G_TYPE_INVALID); } /*... Listing cut for brevity ...*/ static #ifdef G_HAVE_INLINE inline #endif gboolean org_maemo_Value_setvalue1 (DBusGProxy *proxy, const gint IN_new_value, GError **error) { return dbus_g_proxy_call (proxy, "setvalue1", error, G_TYPE_INT, IN_new_value, G_TYPE_INVALID, G_TYPE_INVALID); }
The two functions presented above are both blocking, which means that they wait for the result to arrive over the D-Bus, and only then return to the caller. The generated stub code also includes asynchronous functions (their names end with _async
).
For now, it is important to notice how the prototypes of the functions are named, and what are the parameters that they expect to be passed to them.
The org_maemo_Value
prefix is taken from the interface XML file, from the name attribute of the interface element. All dots are converted into underscores (because C reserves the dot character for other uses), but otherwise the name is preserved (barring dashes in the name).
The rest of the function name is the method name for each method defined in the interface XML file.
The first parameter for all the generated stub functions is always a pointer to a DBusProxy
object, which is necessary to use with the GLib/D-Bus wrapper functions. After the proxy, a list of method parameters is passed. The binding tool prefixes the parameter names with either IN_
or OUT_
depending on the "direction" of the parameter. The rest of the parameter name is taken from the name attributed of the arg element for the method, or if not given, is automatically generated as arg0, arg1, etc. Input parameters are passed as values (unless they are complex or strings, in which case they are passed as pointers). Output parameters are always passed as pointers.
The functions always returns a gboolean
, indicating failure or success, and if they fail, they also create and set the error pointer to an GError
object which can then be checked for the reason for the error (unless the caller passed a NULL
pointer for error
, in which case the error object is not created). glib-dbus-sync/client.c
#include <glib.h> #include <dbus/dbus-glib.h> #include <stdlib.h> /* exit, EXIT_FAILURE */ #include <string.h> /* strcmp */ /* Pull the common symbolic defines. */ #include "common-defs.h" /* Pull in the client stubs that were generated with dbus-binding-tool */ #include "value-client-stub.h"
This allows the client code to use the stub code directly as follows: glib-dbus-sync/client.c
/** * This function is called repeatedly from within the mainloop * timer launch code. * * The function starts with two statically initialized variables * (int and double) which are incremented after each time this * function runs and use the setvalue* remote methods to set the * new values. If the set methods fail, program is not aborted, but an * message is issued to the user describing the error. */ static gboolean timerCallback(DBusGProxy* remoteobj) { /* Local values that we'll start updating to the remote object. */ static gint localValue1 = -80; static gdouble localValue2 = -120.0; GError* error = NULL; /* Set the first value. */ org_maemo_Value_setvalue1(remoteobj, localValue1, &error); if (error != NULL) { handleError("Failed to set value1", error->message, FALSE); } else { g_print(PROGNAME ":timerCallback Set value1 to %d\n", localValue1); } /* If there was an error with the first, release the error, and don't attempt the second time. Also, don't add to the local values. We assume that errors from the first set are caused by server going off the D-Bus, but are hopeful that it comes back, and hence keep trying (returning TRUE). */ if (error != NULL) { g_clear_error(&error); return TRUE; } /* Now try to set the second value as well. */ org_maemo_Value_setvalue2(remoteobj, localValue2, &error); if (error != NULL) { handleError("Failed to set value2", error->message, FALSE); g_clear_error(&error); /* Or g_error_free in this case. */ } else { g_print(PROGNAME ":timerCallback Set value2 to %.3lf\n", localValue2); } /* Step the local values forward. */ localValue1 += 10; localValue2 += 10.0; /* Tell the timer launcher that we want to remain on the timer call list in the future as well. Returning FALSE here stops the launch of this timer callback. */ return TRUE; }
What is left is connecting to the correct D-Bus, creating a GProxy
object which are done in the test program: glib-dbus-sync/client.c
/** * The test program itself. * * 1) Setup GType/GSignal * 2) Create GMainLoop object * 3) Connect to the Session D-Bus * 4) Create a proxy GObject for the remote Value object * 5) Start a timer that launches timerCallback once per second. * 6) Run main-loop (forever) */ int main(int argc, char** argv) { /* The D-Bus connection object. Provided by GLib/D-Bus wrappers. */ DBusGConnection* bus; /* This represents the Value object locally (acting as a proxy for all method calls and signal delivery. */ DBusGProxy* remoteValue; /* This refers to the GMainLoop object */ GMainLoop* mainloop; GError* error = NULL; /* Initialize the GType/GObject system. */ g_type_init(); /* Create a new GMainLoop with default context (NULL) and initial state of "not running" (FALSE). */ mainloop = g_main_loop_new(NULL, FALSE); /* Failure to create the main loop is fatal (for us). */ if (mainloop == NULL) { handleError("Failed to create the mainloop", "Unknown (OOM?)", TRUE); } g_print(PROGNAME ":main Connecting to Session D-Bus.\n"); bus = dbus_g_bus_get(DBUS_BUS_SESSION, &error); if (error != NULL) { handleError("Couldn't connect to the Session bus", error->message, TRUE); /* Normally you'd have to also g_error_free() the error object but because the program terminates within handleError, it is not necessary here. */ } g_print(PROGNAME ":main Creating a GLib proxy object for Value.\n"); /* Create the proxy object that we are using to access the object on the server. If you use dbus_g_proxy_for_name_owner(), you are also notified when the server that implements the object is removed (or rather, the interface is removed). Because we do not care who actually implements the interface, we'll use the more common function. See the API documentation at http://maemo.org/api_refs/4.0/dbus/ for more details. */ remoteValue = dbus_g_proxy_new_for_name(bus, VALUE_SERVICE_NAME, /* name */ VALUE_SERVICE_OBJECT_PATH, /* obj path */ VALUE_SERVICE_INTERFACE /* interface */); if (remoteValue == NULL) { handleError("Couldn't create the proxy object", "Unknown(dbus_g_proxy_new_for_name)", TRUE); } g_print(PROGNAME ":main Starting main loop (first timer in 1s).\n"); /* Register a timer callback that does RPC sets on the values. The userdata pointer is used to pass the proxy object to the callback so that it can launch modifications to the object. */ g_timeout_add(1000, (GSourceFunc)timerCallback, remoteValue); /* Run the program. */ g_main_loop_run(mainloop); /* Because the main loop is not stopped (by this code), we should not ever get here. The program might abort() for other reasons. */ /* If it does, return failure as exit code. */ return EXIT_FAILURE; }
After building the client, start and execute it in the same terminal session where the server is still running:
[sbox-DIABLO_X86: ~/glib-dbus-sync] > make client dbus-binding-tool --prefix=value_object --mode=glib-client \ value-dbus-interface.xml > value-client-stub.h cc -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include \ -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -g -Wall \ -DG_DISABLE_DEPRECATED -DNO_DAEMON -DPROGNAME=\"client\" \ -c client.c -o client.o cc client.o -o client -ldbus-glib-1 -ldbus-1 -lgobject-2.0 -lglib-2.0 [sbox-DIABLO_X86: ~/glib-dbus-sync] > run-standalone.sh ./client client:main Connecting to Session D-Bus. client:main Creating a GLib proxy object for Value. client:main Starting main loop (first timer in 1s). server:value_object_setvalue1: Called (valueIn=-80) client:timerCallback Set value1 to -80 server:value_object_setvalue2: Called (valueIn=-120.000) client:timerCallback Set value2 to -120.000 server:value_object_setvalue1: Called (valueIn=-70) client:timerCallback Set value1 to -70 server:value_object_setvalue2: Called (valueIn=-110.000) client:timerCallback Set value2 to -110.000 server:value_object_setvalue1: Called (valueIn=-60) client:timerCallback Set value1 to -60 ... [Ctrl+c] [sbox-DIABLO_X86: ~/glib-dbus-sync] > fg run-standalone.sh ./server [Ctrl+c]
Because the client normally runs forever, it is now terminated and the server is moved to the foreground, so that it can also be terminated. This concludes the first GLib/D-Bus example, but for more information about the GLib D-Bus wrappers, please consult the D-Bus GLib Bindings Documentation.
[edit] D-Bus Introspection
D-Bus supports a mechanism by which programs can interrogate the bus for existing well-known names and get the interfaces implemented by the objects available behind the well-known names. This mechanism is called introspection in D-Bus terminology.
The main goal of supporting introspection in D-Bus is allowing dynamic bindings to be made with high-level programming languages. This way, the language wrappers for D-Bus can be more intelligent automatically (assuming they utilize the introspection interface). The GLib-wrappers do not use the introspection interface.
Introspection is achieved with three D-Bus methods: ListNames
, GetNameOwner
and Introspect
. The destination object must support the introspection interface in order to provide this information. If the dbus-bindings-tool
is used, and the GObject
is registered correctly, the service automatically supports introspection.
For the time being, D-Bus does not come with introspection utilities, but some are available from other sources. One simple program is the "DBus Inspector" that is written in Python, and uses the Python D-Bus bindings and GTK+. If you are planning to write your own tool, you must be prepared to parse XML data, because that is the format of results that the Introspect method returns.
File:Dbus-inspector-on-globalvalue-with-names.pngUsing DBUS Inspector on GlobalValue
on a desktop system. Note that the version of GlobalValue
used here also implements signals.
Introspection can also be useful when trying to find out what are the different interfaces and methods available for use on a system. However, bear in mind that not all D-Bus services actually implement the introspection interface. Their well-known names can be received, but their interface descriptions come up empty when using Introspect.
- This page was last modified on 22 September 2010, at 19:51.
- This page has been accessed 39,898 times.