maemo.org Bugzilla – Bug 8545
Connection problems with OpenWRT dd-wrt v24
Last modified: 2010-08-26 19:04:03 UTC
You need to
before you can comment on or make changes to this bug.
EXACT STEPS LEADING TO PROBLEM:
Try to connect with dd-wrt access point in WPA and WPA2 PSK
EXTRA SOFTWARE INSTALLED:
Only seeen against Linksys hardware so far.
User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:184.108.40.206)
Gecko/20100106 Ubuntu/9.10 (karmic) Firefox/3.5.7
First reports are here:
I have not been able to reproduce these problems since PR 1.1.1 and am
interested to hear if anyone is still suffering the same issue?
Always worked fine for me with OpenWRT on various Buffalo airstations.
Currently using a WHR-HP-G54 running kamikaze 8.09 (r14511) with kernel 2.4 and
the broadcom driver.
No more connection errors for me (Linksys dd-wrt, WPA2 Personal/AES).
I thought PR1.1.1 firmware had solved this bug for me but it just took longer
for the problem to happen again.
When it happens, if I change DD-WRT router to WEP, N900 connects. If I left in
WPA2 Personal AES it will only connect if I reboot N900. Reboot the router
@Danilo: We still have this bug open internally, I have managed to reproduce it
I've begun to hit a problem (this bug I think) over the last few days.
It's been fine since 1.1.1 but has been getting less happy about connecting -
eventually after a couple of N900 reboots it will connect.
I have 2 WRT54G setup as so:
Firmware OpenWrt White Russian - With X-Wrt Extensions 0.9
Kernel Linux 2.4.30 #1 Wed Aug 8 08:21:33 CDT 2007
Device Linksys WRT54G/GS/GL
Board Broadcom BCM947XX
The original problem was moving from one AP to the other. That seems fixed now.
here's a dmesg snippet. Notice it kinda connected and then dropped by itself.
The second time it stayed up and I ssh'ed in ... that seems to help.
[ 52.563781] Driver 'sd' needs updating - please use bus_type methods
[ 53.288696] wl1251: 151 tx blocks at 0x3b788, 35 rx blocks at 0x3a780
[ 53.324981] wl1251: firmware booted (Rev 220.127.116.11.7)
[ 54.702941] wl1251: down
[ 56.124694] wl1251: 151 tx blocks at 0x3b788, 35 rx blocks at 0x3a780
[ 56.140258] wl1251: firmware booted (Rev 18.104.22.168.7)
[ 57.062713] wlan0: authenticate with AP 00:1c:10:a3:03:9e
[ 57.065216] wlan0: authenticated
[ 57.065246] wlan0: associate with AP 00:1c:10:a3:03:9e
[ 57.069580] wlan0: RX AssocResp from 00:1c:10:a3:03:9e (capab=0x411 status=0
[ 57.069580] wlan0: associated
[ 74.437835] wlan0: deauthenticating by local choice (reason=3)
[ 74.624847] wl1251: down
[ 75.077697] gprs0: attached
[ 194.569976] wl1251: 151 tx blocks at 0x3b788, 35 rx blocks at 0x3a780
[ 194.585662] wl1251: firmware booted (Rev 22.214.171.124.7)
[ 195.453002] wl1251: down
[ 198.226379] wl1251: 151 tx blocks at 0x3b788, 35 rx blocks at 0x3a780
[ 198.241943] wl1251: firmware booted (Rev 126.96.36.199.7)
[ 198.999664] wlan0: authenticate with AP 00:1c:10:a3:03:9e
[ 199.005126] wlan0: authenticated
[ 199.005187] wlan0: associate with AP 00:1c:10:a3:03:9e
[ 199.012695] wlan0: RX AssocResp from 00:1c:10:a3:03:9e (capab=0x411 status=0
[ 199.012756] wlan0: associated
[ 213.906585] gprs0: detached