N900 Hardware Power Consumption
This page contains information on the amount of energy used by each subsystem of the N900, and where applicable ways it can be reduced.
Much of any reduction will require additional software, some may be possible by altering user behavior in ways that do not impact the users overall experience..
Measuring power usage is hard. For example, power consumption of the speakers/speaker-amp has to be disentangled from power consumption of reading a file from SD/eMMC, decoding it, PulseAudio's power use, and the DAC power use.
Below currents are from l3/l4 manual - assumed to be from a supply at 5 V.
- FMTX 19 mA - l3/4
- WLAN on - no powersave - 200 mA
- WLAN transmit 802.11b - 150 mA
Battery parameters can be monitored thru fuel gauge asic TI BQ27200 [1]
Contents |
Some preliminary numbers using the battery monitor chip.
These numbers are biased, and represent best cases. Some have had outliers which may be normal and unavoidable current spikes removed. This is under the assumption that the minimal power represents the minimum power achievable, and it should long-term be possible to - possibly with software patches - achieve these. +x indicates the measurement is for that element only. A raw measurement has no +, and is a total. Unless otherwise mentioned, numbers are for the idle locked case, with screen off. Assume
- Suspend (echo mem >/sys/power/state), wifi and GSM off. 2 mA
- Suspend, GSM on, connected to 3G (2 bars) 5 mA
- Suspend, GSM on, connected to 2G. (2 bars) 3.6 mA
- Idle, no SIM, wlan off 7 mA@4.1 V
- Wifi on with maximum powersaving. +~2 mA
- MMC card in. Under 1 mA
- Xchat running, sporadic traffic. +8 mA
- Screen on, no backlight. +80 mA
- Backlight on max +150 mA, +40mA on 4 of 5 steps in simple brightness applet & low ambient (/sys/class/backlight/acx565akm/brightness = 63)
- Media player playing MP3, one step above mute. 110 mA
- Vibrator at max +100 mA
- md5sum /dev/zero 250 mA
- md5sum /dev/mmcblk1p1 - 1G SD card. 240 mA
- md5sum /dev/mmcblk0 - internal MMC 240 mA (these indicate the CPU is somewhat idle, waiting on IO, and this counteracts any increased power use by the memory)
- camera active, showing preview. (backlight off) 210 mA
- GPS - location test gui - in continuous GPS recieve mode - +50-80 mA
- 3G connected, good signal, no data or other activity +8 mA.
- 2G connected, good signal, no data or other activity +5 mA
2G data, short pings
- 1 s ping 130 mA
- 10 s ping 70 mA
- 30 s ping 45 mA
3.5G data, short pings
- 1 s 186 mA
- 10 s 120 mA approx.
- 30 s 136 mA
3.5g data, long pings (8000 bytes)
- 1 s 240 mA
- 10 s 205 mA
- 30 s 120 mA
2G data, long pings (8000 bytes) (with specified seconds between pings)
- 1 s 160 mA
- 10 s 105 mA
- 30 s 50 mA
3G sending file at 150 k/s 375 mA 3G recieving at 200 k/s 275 mA
--
random adds:
WLAN PS-mode medium,10 mW, ssh login active, local xterm with bq27200 script loop -9, screen blanked, aggressive custom breathing indicator light: 20 mA
xchat 8 freenode chan, wifi PSM medium, screen locked:
Nokia-N900-42-11:~# bin/bq27200.sh 20
LOOPMODE=20
mv RSOC CSOC mA NAC CACD CACT TTF TTE TEMP EDV1 LOW
18:36 4092 100 100 -134 1187 1187 1187 65535 530 37 0
18:36 4092 100 100 -17 1186 1186 1186 65535 3990 37 0
18:37 4106 99 99 -68 1186 1186 1186 65535 1042 37 0
18:37 4095 99 99 -52 1185 1185 1185 65535 1359 36 0
18:37 4130 99 99 -18 1185 1185 1185 65535 3807 36 0
18:38 4092 99 99 -138 1184 1184 1184 65535 511 36 0
18:38 4090 99 99 -110 1184 1184 1184 65535 644 36 0
18:38 4090 99 99 -57 1183 1183 1183 65535 1241 36 0
18:39 4090 99 99 -118 1183 1183 1183 65535 597 36 0
18:39 4114 99 99 -34 1182 1182 1182 65535 2077 36 0
18:39 4127 99 99 -17 1182 1182 1182 65535 3569 36 0
18:40 4122 99 99 -77 1181 1181 1181 65535 570 36 0
18:40 4087 99 99 -64 1180 1180 1180 65535 3403 36 0
Software
Many software subsystems interact to aim to reduce battery usage.