Compile FreePascal on device
m (→Compile Lazarus) |
|||
(11 intermediate revisions not shown) | |||
Line 1: | Line 1: | ||
- | + | [http://freepascal.org FreePascal compiler] is a free compiler for the various Pascal dialects. There is also a project [http://lazarus.freepascal.org Lazarus] which provides a Delphi-like IDE for the FreePascal compiler. This article describes how to compile and install FreePascal compiler right on the device (currently [[Nokia N900|N900]] only, still have troubles to successfully compile it on my [[Nokia N810|N810]]). You may need a lot of space, so it is very useful to [[Ext2 on microSD card|format an external SD card as ext2 or ext3]]. | |
- | + | ||
+ | ==Bootstrapping== | ||
- | |||
First we need to get a working copy of fpc for ARM EABI. Currently, it is possible to get only ARB OABI version at the FreePascal web site. (version 2.2.2) | First we need to get a working copy of fpc for ARM EABI. Currently, it is possible to get only ARB OABI version at the FreePascal web site. (version 2.2.2) | ||
That's why we need to compile an ARM version of the compiler on the GNU/Linux PC first, then transfer it to the Nokia device, and compile the full compiler distribution there. | That's why we need to compile an ARM version of the compiler on the GNU/Linux PC first, then transfer it to the Nokia device, and compile the full compiler distribution there. | ||
- | + | <ol> | |
+ | <li> | ||
+ | First you need to have fpc installed on your GNU/Linux box. | ||
+ | </li> | ||
+ | <li> | ||
Then, download fpc source with svn. | Then, download fpc source with svn. | ||
<pre> | <pre> | ||
svn checkout http://svn.freepascal.org/svn/fpc/trunk fpc | svn checkout http://svn.freepascal.org/svn/fpc/trunk fpc | ||
</pre> | </pre> | ||
- | You also need cross binutils for ARM. | + | </li> |
- | Let's compile it like this: | + | <li> |
+ | You also need cross binutils for ARM. Let's compile it like this: | ||
<pre> | <pre> | ||
mkdir binutils | mkdir binutils | ||
Line 21: | Line 26: | ||
cd $BINUTILS | cd $BINUTILS | ||
./configure --prefix=/opt/binutils-arm-eabi --target=arm-none-eabi --with-gnu-as | ./configure --prefix=/opt/binutils-arm-eabi --target=arm-none-eabi --with-gnu-as | ||
- | --with-gnu-ld | + | --with-gnu-ld |
make | make | ||
make install | make install | ||
Line 29: | Line 34: | ||
-linux-ld | -linux-ld | ||
</pre> | </pre> | ||
+ | </li> | ||
+ | <li> | ||
Then, export PATH so it will contain your binutils path first | Then, export PATH so it will contain your binutils path first | ||
<pre> | <pre> | ||
export PATH=/opt/binutils-arm-eabi/bin:$PATH | export PATH=/opt/binutils-arm-eabi/bin:$PATH | ||
</pre> | </pre> | ||
- | + | </li> | |
+ | <li> | ||
Now we can compile fpc for ARM EABI. Go to fpc svn directory and run: | Now we can compile fpc for ARM EABI. Go to fpc svn directory and run: | ||
- | |||
<pre> | <pre> | ||
make all PREFIX=/opt/fpc-arm OS_TARGET=linux CPU_TARGET=arm OPT="-dFPC_ARMEL" | make all PREFIX=/opt/fpc-arm OS_TARGET=linux CPU_TARGET=arm OPT="-dFPC_ARMEL" | ||
</pre> | </pre> | ||
- | + | </li> | |
+ | <li> | ||
After successful compilation you will get "ppcarm" binary in the "compiler" folder inside fpc source tree. | After successful compilation you will get "ppcarm" binary in the "compiler" folder inside fpc source tree. | ||
- | |||
<pre> | <pre> | ||
noch@hactar:~/freepascal/svn/fpc/compiler$ file ppcarm | noch@hactar:~/freepascal/svn/fpc/compiler$ file ppcarm | ||
ppcarm: ELF 32-bit LSB executable, ARM, version 1 (SYSV), statically linked, stripped | ppcarm: ELF 32-bit LSB executable, ARM, version 1 (SYSV), statically linked, stripped | ||
</pre> | </pre> | ||
+ | </li> | ||
+ | <li> | ||
+ | Now it's time to scp ppcarm to the Nokia Maemo device, and compile with it sources there. From this point we work only on Maemo. I assume that you have <code>openssh-server</code> installed. You will also need the following packages: | ||
+ | <ul> | ||
+ | <li><code>subversion</code> - to get fpc source tree</li> | ||
+ | <li><code>binutils</code> - to get GNU assembler and linker</li> | ||
+ | <li><code>diffutils-gnu</code> - fpc needs "diff" to compile itself</li> | ||
+ | <li><code>coreutils-gnu</code> - contains, "install" command, needed to run "make install"</li> | ||
+ | </ul> | ||
- | + | For Diablo, I found "diffutils" package in the [http://www.gronmayer.com/it/dl.php?id=224 Dayless] repository at the [http://www.gronmayer.com/it gronmayer] repository list. | |
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | For Diablo, I found "diffutils" package in the | + | |
<pre> | <pre> | ||
Line 69: | Line 78: | ||
/usr/bin/gdiff | /usr/bin/gdiff | ||
</pre> | </pre> | ||
- | Because fpc needs "diff" executable, then there's two options. Whether to add /usr/bin/gnu to the PATH | + | </li> |
+ | <li> | ||
+ | Because fpc needs "diff" executable, then there's two options. Whether to add <code>/usr/bin/gnu</code> to the <code>PATH</code>: | ||
<pre> export PATH=/usr/bin/gnu:$PATH</pre> | <pre> export PATH=/usr/bin/gnu:$PATH</pre> | ||
- | or create a symlink to gdiff in /usr/bin | + | or create a symlink to <code>gdiff</code> in <code>/usr/bin</code> |
<pre>ln -s /usr/bin/gdiff /usr/bin/diff</pre> | <pre>ln -s /usr/bin/gdiff /usr/bin/diff</pre> | ||
- | + | </li> | |
+ | <li> | ||
There is a linker problem like | There is a linker problem like | ||
<pre> | <pre> | ||
Line 82: | Line 94: | ||
Fatal: Compilation aborted | Fatal: Compilation aborted | ||
</pre> | </pre> | ||
- | In order to avoid this, go to | + | In order to avoid this, go to <code>compiler/systems</code> and change <code>t_linux.pas</code> so that it contain path to the <code>/lib/ld-linux.so.3</code> instead of <code>/lib/ld-linux.so.2</code>, because we do not have <code>/lib/ld-linux.so.2</code> on Maemo 4 and Maemo 5. This is a [[http://free-pascal-general.1045716.n5.nabble.com/FreePascal-on-ARM-Linux-SoftFloat-and-EABI-issues-td2819338.html quote]] from the freepascal mailing list: |
- | This is a [[http://free-pascal-general.1045716.n5.nabble.com/FreePascal-on-ARM-Linux-SoftFloat-and-EABI-issues-td2819338.html quote]] from the freepascal mailing list: | + | |
<pre> | <pre> | ||
> also although it creates an EABI 4 executable correctly there is a | > also although it creates an EABI 4 executable correctly there is a | ||
Line 95: | Line 106: | ||
> {$else} | > {$else} | ||
</pre> | </pre> | ||
- | + | </li> | |
- | + | <li> | |
So, change to the fpc source directory and run: | So, change to the fpc source directory and run: | ||
<pre> | <pre> | ||
make clean all PP=/path/to/newlycopied/ppcarm PREFIX="/opt/fpc-svn" OPT="-dFPC_ARMEL -O- -dFPC_ABI_EABI" | make clean all PP=/path/to/newlycopied/ppcarm PREFIX="/opt/fpc-svn" OPT="-dFPC_ARMEL -O- -dFPC_ABI_EABI" | ||
</pre> | </pre> | ||
- | + | </li> | |
+ | <li> | ||
+ | If you have compilation error like this | ||
+ | <pre> | ||
+ | __missing_command_DATA2INC fpc | ||
+ | </pre> | ||
+ | it means compiler cannot find "data2inc" file and we need to provide path for that, so the command is | ||
+ | <pre> | ||
+ | make clean all PP=/path/to/newlycopied/ppcarm DATA2INC="/path/to/fpc_source/utils/data2inc" PREFIX="/opt/fpc-svn" OPT="-dFPC_ARMEL -O- -dFPC_ABI_EABI" | ||
+ | </pre> | ||
Then, make install with the same options | Then, make install with the same options | ||
<pre> | <pre> | ||
make install PP=/path/to/newlycopied/ppcarm PREFIX="/opt/fpc-svn" OPT="-dFPC_ARMEL -O- -dFPC_ABI_EABI" | make install PP=/path/to/newlycopied/ppcarm PREFIX="/opt/fpc-svn" OPT="-dFPC_ARMEL -O- -dFPC_ABI_EABI" | ||
</pre> | </pre> | ||
+ | </li> | ||
+ | </ol> | ||
+ | |||
==Creating config== | ==Creating config== | ||
- | Now, we have a working compiler in /opt/fpc-svn/bin | + | |
- | But there are no config file, so it won't work. | + | Now, we have a working compiler in <code>/opt/fpc-svn/bin</code>. But there are no config file, so it won't work. |
- | In order to create a config file, do | + | <ol> |
+ | <li> | ||
+ | In order to create a config file, do: | ||
<pre> | <pre> | ||
- | /opt/fpc-svn/bin/fpcmkcfg -d basepath=/opt/fpc-svn/lib/fpc/2.5.1 -o /etc/fpc.cfg | + | /opt/fpc-svn/bin/fpcmkcfg -d basepath=/opt/fpc-svn/lib/fpc/2.5.1/ -o /etc/fpc.cfg |
</pre> | </pre> | ||
- | + | </li> | |
- | It is also necessary to have correct path | + | <li> |
+ | It is also necessary to have correct path: | ||
<pre> | <pre> | ||
export PATH=/opt/fpc-svn/lib/fpc/2.5.1:/opt/fpc-svn/bin:$PATH | export PATH=/opt/fpc-svn/lib/fpc/2.5.1:/opt/fpc-svn/bin:$PATH | ||
</pre> | </pre> | ||
Second directory contains ppcarm binary, which is necessary for compilation. | Second directory contains ppcarm binary, which is necessary for compilation. | ||
+ | </li> | ||
+ | </ol> | ||
This is it, now you have a working FreePascal compiler on Maemo. Next step is to install Lazarus, so you will be able to compile Lazarus created sources right on the device. | This is it, now you have a working FreePascal compiler on Maemo. Next step is to install Lazarus, so you will be able to compile Lazarus created sources right on the device. | ||
Line 128: | Line 156: | ||
</pre> | </pre> | ||
- | Lazarus compilation will fail with the binutils of | + | Lazarus compilation will fail with the binutils of Maemo 5. Thus we need to compile newer binutils and we need gcc for it. |
- | Thus we need to compile newer binutils and we need gcc for it. | + | |
+ | <ol> | ||
+ | <li> | ||
Add SDK repository to the apt config | Add SDK repository to the apt config | ||
<pre>vi /etc/apt/sources.list.d/dev.list</pre> | <pre>vi /etc/apt/sources.list.d/dev.list</pre> | ||
<pre>deb http://repository.maemo.org fremantle/sdk free non-free</pre> | <pre>deb http://repository.maemo.org fremantle/sdk free non-free</pre> | ||
DO NOT UPGRADE YOUR SYSTEM WITH THIS CONFIG LINE ENABLED! | DO NOT UPGRADE YOUR SYSTEM WITH THIS CONFIG LINE ENABLED! | ||
+ | </li> | ||
+ | <li> | ||
<pre> | <pre> | ||
apt-get update | apt-get update | ||
apt-get install gcc autoconf automake1.9 libtool flex bison gdb automaken libltdl3-dev | apt-get install gcc autoconf automake1.9 libtool flex bison gdb automaken libltdl3-dev | ||
</pre> | </pre> | ||
+ | </li> | ||
+ | <li> | ||
At this point I also have gettext installed. | At this point I also have gettext installed. | ||
<pre> | <pre> | ||
apt-get install gettext | apt-get install gettext | ||
</pre> | </pre> | ||
- | Now install binutils. For that you also need tar-gnu and bzip2 packages: | + | </li> |
+ | <li> | ||
+ | Dependencies for lazarus: | ||
+ | <pre>apt-get install libgtk2.0-dev libgpmg1-dev libncurses5-dev</pre> | ||
+ | It will compile, but won't link without them. | ||
+ | </li> | ||
+ | <li> | ||
+ | Now install binutils. For that you also need <code>tar-gnu</code> and <code>bzip2</code> packages: | ||
<pre> | <pre> | ||
apt-get install tar-gnu bzip2 | apt-get install tar-gnu bzip2 | ||
</pre> | </pre> | ||
- | + | </li> | |
- | + | <li> | |
- | + | I use the following script: | |
- | < | + | <source lang="bash"> |
#!/bin/bash | #!/bin/bash | ||
BINUTILS=binutils-2.20.1 | BINUTILS=binutils-2.20.1 | ||
Line 162: | Line 202: | ||
ln -s /opt/binutils-arm-eabi/bin/arm-none-eabi-as /opt/binutils-arm-eabi/bin/arm | ln -s /opt/binutils-arm-eabi/bin/arm-none-eabi-as /opt/binutils-arm-eabi/bin/arm | ||
ln -s /opt/binutils-arm-eabi/bin/arm-none-eabi-ld /opt/binutils-arm-eabi/bin/arm | ln -s /opt/binutils-arm-eabi/bin/arm-none-eabi-ld /opt/binutils-arm-eabi/bin/arm | ||
- | </ | + | </source> |
- | + | </li> | |
- | Update the PATH environment variable so it contain newly installed binutils at first place: | + | <li> |
- | + | Update the <code>PATH</code> environment variable so it contain newly installed binutils at first place: | |
<pre> | <pre> | ||
export PATH=/opt/binutils-arm-eabi/bin:$PATH | export PATH=/opt/binutils-arm-eabi/bin:$PATH | ||
Line 171: | Line 211: | ||
or if fpc is not currently in the path in this terminal, then | or if fpc is not currently in the path in this terminal, then | ||
<pre>export PATH=/opt/binutils-arm-eabi/bin:/opt/fpc-svn/lib/fpc/2.5.1:/opt/fpc-svn/bin:$PATH</pre> | <pre>export PATH=/opt/binutils-arm-eabi/bin:/opt/fpc-svn/lib/fpc/2.5.1:/opt/fpc-svn/bin:$PATH</pre> | ||
- | + | </li> | |
+ | <li> | ||
cd into lazarus directory | cd into lazarus directory | ||
<pre> | <pre> | ||
make clean all | make clean all | ||
+ | </pre> | ||
+ | if it fails with | ||
+ | <pre> | ||
+ | Need "lazarus_0.9.31.orig.tar.gz" to build for DEBBUILD = "" | ||
+ | </pre> | ||
+ | then you will be able to compile it with | ||
+ | <pre> | ||
+ | make DEBUSESVN=1 clean all | ||
+ | </pre> | ||
+ | |||
+ | if it still fails with | ||
+ | <pre> | ||
+ | make -C ide ide | ||
+ | make[1]: Entering directory `/media/mmc1/noch/src/freepascal/lazarus-svn-2011-02-10/ide' | ||
+ | ../tools/svn2revisioninc .. revision.inc | ||
+ | make[1]: *** [revisioninc] Segmentation fault | ||
+ | make[1]: Leaving directory `/media/mmc1/noch/src/freepascal/lazarus-svn-2011-02-10/ide' | ||
+ | make: *** [ide] Error 2 | ||
+ | </pre> | ||
+ | then according to [http://bugs.freepascal.org/bug_view_page.php?bug_id=18271 this] link it could be solved by USESVN2REVISIONINC=0 | ||
+ | <pre> | ||
+ | make LCL_PLATFORM=gtk USESVN2REVISIONINC=0 DEBUSESVN=1 clean all | ||
+ | </pre> | ||
+ | </li> | ||
+ | </ol> | ||
+ | |||
+ | ==Compile on device== | ||
+ | |||
+ | This script will help you to compile your application on device. | ||
+ | <pre> | ||
+ | ARCH="arm-linux" | ||
+ | LAZARUS="/media/mmc1/noch/lazarus" | ||
+ | fpc project1.lpr -MObjFPC -Scgi -O1 -gl -WG -vewnhi -l -Fu$LAZARUS/lcl/units/$ARCH/ -Fu$LAZARUS/lcl/units/$ARCH/gtk2/ -Fu$LAZARUS/packager/units/$ARCH/ -Fu. -oproject1 -dLCL -dLCLgtk2 | ||
</pre> | </pre> | ||
+ | Now it is possible to run it :) | ||
- | + | Actually, you may need a longer compile line, to find out that, click on "Show options" button in Project -> Compiler Options, and change the line correspondingly, by replacing ARCH and LAZARUS paths. | |
[[Category:N8x0]] | [[Category:N8x0]] | ||
[[Category:N900]] | [[Category:N900]] | ||
[[Category:Development]] | [[Category:Development]] | ||
- |
Latest revision as of 18:49, 6 May 2011
FreePascal compiler is a free compiler for the various Pascal dialects. There is also a project Lazarus which provides a Delphi-like IDE for the FreePascal compiler. This article describes how to compile and install FreePascal compiler right on the device (currently N900 only, still have troubles to successfully compile it on my N810). You may need a lot of space, so it is very useful to format an external SD card as ext2 or ext3.
Contents |
[edit] Bootstrapping
First we need to get a working copy of fpc for ARM EABI. Currently, it is possible to get only ARB OABI version at the FreePascal web site. (version 2.2.2)
That's why we need to compile an ARM version of the compiler on the GNU/Linux PC first, then transfer it to the Nokia device, and compile the full compiler distribution there.
- First you need to have fpc installed on your GNU/Linux box.
-
Then, download fpc source with svn.
svn checkout http://svn.freepascal.org/svn/fpc/trunk fpc
-
You also need cross binutils for ARM. Let's compile it like this:
mkdir binutils cd binutils BINUTILS=binutils-2.20.1 wget http://ftp.gnu.org/gnu/binutils/$BINUTILS.tar.bz2 tar jxvf $BINUTILS.tar.bz2 cd $BINUTILS ./configure --prefix=/opt/binutils-arm-eabi --target=arm-none-eabi --with-gnu-as --with-gnu-ld make make install ln -s /opt/binutils-arm-eabi/bin/arm-none-eabi-as /opt/binutils-arm-eabi/bin/arm -linux-as ln -s /opt/binutils-arm-eabi/bin/arm-none-eabi-ld /opt/binutils-arm-eabi/bin/arm -linux-ld
-
Then, export PATH so it will contain your binutils path first
export PATH=/opt/binutils-arm-eabi/bin:$PATH
-
Now we can compile fpc for ARM EABI. Go to fpc svn directory and run:
make all PREFIX=/opt/fpc-arm OS_TARGET=linux CPU_TARGET=arm OPT="-dFPC_ARMEL"
-
After successful compilation you will get "ppcarm" binary in the "compiler" folder inside fpc source tree.
noch@hactar:~/freepascal/svn/fpc/compiler$ file ppcarm ppcarm: ELF 32-bit LSB executable, ARM, version 1 (SYSV), statically linked, stripped
-
Now it's time to scp ppcarm to the Nokia Maemo device, and compile with it sources there. From this point we work only on Maemo. I assume that you have
openssh-server
installed. You will also need the following packages:subversion
- to get fpc source treebinutils
- to get GNU assembler and linkerdiffutils-gnu
- fpc needs "diff" to compile itselfcoreutils-gnu
- contains, "install" command, needed to run "make install"
For Diablo, I found "diffutils" package in the Dayless repository at the gronmayer repository list.
# dpkg -L diffutils-gnu | grep bin /usr/bin /usr/bin/gnu /usr/bin/gnu/cmp /usr/bin/gnu/diff /usr/bin/gnu/diff3 /usr/bin/gnu/sdiff /usr/bin/gcmp /usr/bin/gsdiff /usr/bin/gdiff3 /usr/bin/gdiff
-
Because fpc needs "diff" executable, then there's two options. Whether to add
/usr/bin/gnu
to thePATH
:export PATH=/usr/bin/gnu:$PATH
or create a symlink to
gdiff
in/usr/bin
ln -s /usr/bin/gdiff /usr/bin/diff
-
There is a linker problem like
./link.res: file format not recognized; treating as linker script ./link.res:281: syntax error pp.pas(209,27) Error: Error while linking pp.pas(209,27) Fatal: There were 1 errors compiling module, stopping Fatal: Compilation aborted
In order to avoid this, go to
compiler/systems
and changet_linux.pas
so that it contain path to the/lib/ld-linux.so.3
instead of/lib/ld-linux.so.2
, because we do not have/lib/ld-linux.so.2
on Maemo 4 and Maemo 5. This is a [quote] from the freepascal mailing list:> also although it creates an EABI 4 executable correctly there is a > problem with fpc-svn/compiler/systems/t_linux.pas that sticks the wrong > dynamic linker name in the file. I fixed it with this... > > > {$ifdef arm} > {$ifdef FPC_ARMEL} > defdynlinker:='/lib/ld-linux.so.3'; > {$else}
-
So, change to the fpc source directory and run:
make clean all PP=/path/to/newlycopied/ppcarm PREFIX="/opt/fpc-svn" OPT="-dFPC_ARMEL -O- -dFPC_ABI_EABI"
-
If you have compilation error like this
__missing_command_DATA2INC fpc
it means compiler cannot find "data2inc" file and we need to provide path for that, so the command is
make clean all PP=/path/to/newlycopied/ppcarm DATA2INC="/path/to/fpc_source/utils/data2inc" PREFIX="/opt/fpc-svn" OPT="-dFPC_ARMEL -O- -dFPC_ABI_EABI"
Then, make install with the same options
make install PP=/path/to/newlycopied/ppcarm PREFIX="/opt/fpc-svn" OPT="-dFPC_ARMEL -O- -dFPC_ABI_EABI"
[edit] Creating config
Now, we have a working compiler in /opt/fpc-svn/bin
. But there are no config file, so it won't work.
-
In order to create a config file, do:
/opt/fpc-svn/bin/fpcmkcfg -d basepath=/opt/fpc-svn/lib/fpc/2.5.1/ -o /etc/fpc.cfg
-
It is also necessary to have correct path:
export PATH=/opt/fpc-svn/lib/fpc/2.5.1:/opt/fpc-svn/bin:$PATH
Second directory contains ppcarm binary, which is necessary for compilation.
This is it, now you have a working FreePascal compiler on Maemo. Next step is to install Lazarus, so you will be able to compile Lazarus created sources right on the device.
[edit] Compile Lazarus
Get the source:
svn co http://svn.freepascal.org/svn/lazarus/trunk lazarus
Lazarus compilation will fail with the binutils of Maemo 5. Thus we need to compile newer binutils and we need gcc for it.
-
Add SDK repository to the apt config
vi /etc/apt/sources.list.d/dev.list
deb http://repository.maemo.org fremantle/sdk free non-free
DO NOT UPGRADE YOUR SYSTEM WITH THIS CONFIG LINE ENABLED!
-
apt-get update apt-get install gcc autoconf automake1.9 libtool flex bison gdb automaken libltdl3-dev
-
At this point I also have gettext installed.
apt-get install gettext
-
Dependencies for lazarus:
apt-get install libgtk2.0-dev libgpmg1-dev libncurses5-dev
It will compile, but won't link without them.
-
Now install binutils. For that you also need
tar-gnu
andbzip2
packages:apt-get install tar-gnu bzip2
-
I use the following script:
#!/bin/bash BINUTILS=binutils-2.20.1 rm -rf $BINUTILS wget -c http://ftp.gnu.org/gnu/binutils/$BINUTILS.tar.bz2 /usr/bin/gnu/tar -jxvf binutils-2.20.1.tar.bz2 cd $BINUTILS ./configure --prefix=/opt/binutils-arm-eabi --target=arm-none-eabi --with-gnu-as make make install ln -s /opt/binutils-arm-eabi/bin/arm-none-eabi-as /opt/binutils-arm-eabi/bin/arm ln -s /opt/binutils-arm-eabi/bin/arm-none-eabi-ld /opt/binutils-arm-eabi/bin/arm
-
Update the
PATH
environment variable so it contain newly installed binutils at first place:export PATH=/opt/binutils-arm-eabi/bin:$PATH
or if fpc is not currently in the path in this terminal, then
export PATH=/opt/binutils-arm-eabi/bin:/opt/fpc-svn/lib/fpc/2.5.1:/opt/fpc-svn/bin:$PATH
-
cd into lazarus directory
make clean all
if it fails with
Need "lazarus_0.9.31.orig.tar.gz" to build for DEBBUILD = ""
then you will be able to compile it with
make DEBUSESVN=1 clean all
if it still fails with
make -C ide ide make[1]: Entering directory `/media/mmc1/noch/src/freepascal/lazarus-svn-2011-02-10/ide' ../tools/svn2revisioninc .. revision.inc make[1]: *** [revisioninc] Segmentation fault make[1]: Leaving directory `/media/mmc1/noch/src/freepascal/lazarus-svn-2011-02-10/ide' make: *** [ide] Error 2
then according to this link it could be solved by USESVN2REVISIONINC=0
make LCL_PLATFORM=gtk USESVN2REVISIONINC=0 DEBUSESVN=1 clean all
[edit] Compile on device
This script will help you to compile your application on device.
ARCH="arm-linux" LAZARUS="/media/mmc1/noch/lazarus" fpc project1.lpr -MObjFPC -Scgi -O1 -gl -WG -vewnhi -l -Fu$LAZARUS/lcl/units/$ARCH/ -Fu$LAZARUS/lcl/units/$ARCH/gtk2/ -Fu$LAZARUS/packager/units/$ARCH/ -Fu. -oproject1 -dLCL -dLCLgtk2
Now it is possible to run it :)
Actually, you may need a longer compile line, to find out that, click on "Show options" button in Project -> Compiler Options, and change the line correspondingly, by replacing ARCH and LAZARUS paths.
- This page was last modified on 6 May 2011, at 18:49.
- This page has been accessed 34,161 times.