KDE on scratchbox for maemo 5

Revision as of 13:22, 12 March 2010

This describes how to compile KDE applications on Scratchbox so they can be run on a Nokia N900. A N900 runs Maemo 5. You need to install Qt, kdesupport, kdelibs and kdepimlibs before you can run KDE applications.

1 How it goes
- 1.1 On the N900
- 1.2 On your desktop
2 See also

How it goes

On the N900

install openssh on the Nokia N900
install subversion

ssh root@localhost
apt-get install subversion

On your desktop

Set up scratchbox

Main article: Documentation/Maemo 5 Final SDK Installation

Install Scratchbox and the Maemo 5 SDK, and then run:

$ /scratchbox/login
[sbox-FREMANTLE_X86: ~] > sb-conf select FREMANTLE_ARMEL

cmake

Main article: Qt4 Hildon#CMake

Install CMake:

[sbox-FREMANTLE_ARMEL: ~] > apt-get install cmake

subversion

Install Subversion:

[sbox-FREMANTLE_ARMEL: ~] > apt-get install subversion

Qt

Download Qt everywhere 4.6 and build it using:

./configure --prefix=/usr && make && make install

libical

libical is needed for kdepimlibs:

cd
wget http://downloads.sourceforge.net/project/freeassociation/libical/libical-0.44/libical-0.44.tar.gz?use_mirror=switch
tar xvzf libical-0.44.tar.gz
cd libical-0.44
./configure && make && make install

gpgme

gpgme is needed for kdepimlibs:

[sbox-FREMANTLE_ARMEL: ~] > apt-get install libgpgme11-dev

boost

libboost is needed for kdepimlibs

apt-get install libboost-graph-dev

giflib

wget http://downloads.sourceforge.net/project/giflib/giflib%204.x/giflib-4.1.6/giflib-4.1.6.tar.bz2?use_mirror=switch
./configure && make && make install

@@ Line 1: / Line 1: @@
-This describes how to compile KDE applications on Scratchbox so they can be run on a Nokia N900. A N900 runs maemo 5. You need to install Qt, kdesupport, kdelibs and kdepimlibs before you can run KDE applications.
+This describes how to compile KDE applications on Scratchbox so they can be run on a [[Nokia N900]]. A N900 runs [[Open development/Maemo roadmap/Fremantle|Maemo 5]]. You need to install Qt, kdesupport, kdelibs and kdepimlibs before you can run KDE applications.
-= What does not work =
+= How it goes =
-== Scratchbox on SUSE 11.2 ==
-Installing maemo 5 (freemantle, see [[codenames]]) for N900 (maemo 5 does not run on the N810) in a SUSE Linux 11.2 x32 virtual machine resulted in
- Processing was halted because there were too many errors.
-== Scratchbox on X86_64 ==
+== On the N900 ==
-Scratchbox cannot be installed on an X86_64 platform. To find out if you have an X86_64 platform, run the following on a console:
- tweedleburg:~ # uname -m
- x86_64
-In this case your computer is based on X86_64. You should create a virtual machine with 32 bit and continue there.
-= How it goes =
-== On the Nokia itself ==
 * [[install openssh on the Nokia N900]]
 * install subversion
@@ Line 21: / Line 11: @@
 == On your desktop ==
-Install an i386 into a VMWare virtual machine. The following describes how to install scratchbox into a SUSE 11.1 32bit installation. It might work same or similar with any Linux.
 === Set up scratchbox ===
- root@i386 # useradd -m scratchboxuser
- root@i386 # passwd scratchboxuser
- root@i386 # wget http://repository.maemo.org/stable/fremantle/maemo-scratchbox-install_5.0.sh
- root@i386 # chmod 777 maemo-scratchbox-install_5.0.sh
- root@i386 # ./maemo-scratchbox-install_5.0.sh -s /scratchbox
- root@i386 # /scratchbox/sbin/sbox_adduser scratchboxuser
- root@i386 # su - scratchboxuser
- scratchboxuser@i386 $ wget http://repository.maemo.org/stable/fremantle/maemo-sdk-install_5.0.sh
- scratchboxuser@i386 $ sh maemo-sdk-install_5.0.sh
-results in
- Happy hacking!
-  scratchboxuser@i386 $ /scratchbox/login
+{{main|Documentation/Maemo 5 Final SDK Installation}}
-  scratchboxuser@i386 $ sb-conf select FREEMANTEL_ARMEL
+Install Scratchbox and the Maemo 5 SDK, and then run:
+  $ /scratchbox/login
+  [sbox-FREMANTLE_X86: ~] > sb-conf select FREMANTLE_ARMEL
 === cmake ===
- [sbox-FREMANTLE_ARMEL: ~] > cd
- [sbox-FREMANTLE_ARMEL: ~] > wget http://www.cmake.org/files/v2.6/cmake-2.6.2.tar.gz
+{{main|Qt4 Hildon#CMake}}
- [sbox-FREMANTLE_ARMEL: ~/cmake-2.6.2] > tar xvzf cmake-2.6.2.tar.gz
- [sbox-FREMANTLE_ARMEL: ~/cmake-2.6.2] > cd cmake-2.6.2
+Install CMake:
-  [sbox-FREMANTLE_ARMEL: ~/cmake-2.6.2] > ./bootstrap && make -j4 && make install
+  [sbox-FREMANTLE_ARMEL: ~] > apt-get install cmake
 === subversion ===
+Install Subversion:
   [sbox-FREMANTLE_ARMEL: ~] > apt-get install subversion
 === Qt ===
-Download Qt everywhere 4.6 and build it using
+Download Qt everywhere 4.6 and build it using:
-  ./configure --prefix=/usr && make -j2 && make install
+  ./configure --prefix=/usr && make && make install
 === libical ===
-libical is needed for kdepimlibs
+libical is needed for kdepimlibs:
   cd
   wget http://downloads.sourceforge.net/project/freeassociation/libical/libical-0.44/libical-0.44.tar.gz?use_mirror=switch
   tar xvzf libical-0.44.tar.gz
   cd libical-0.44
-  ./configure && make -j2 && make install
+  ./configure && make && make install
 === gpgme ===
-gpgme is needed for kdepimlibs
+gpgme is needed for kdepimlibs:
-  curl ftp://ftp.gnupg.org/gcrypt/gpgme/gpgme-1.1.8.tar.bz2 > gpgme-1.1.8.tar.bz2
+  [sbox-FREMANTLE_ARMEL: ~] > apt-get install libgpgme11-dev
- bunzip2  gpgme-1.1.8.tar.bz2
- tar xvf gpgme-1.1.8.tar
- cd gpgme-1.1.8
- ./configure && make -j2 && make install
 === boost ===
@@ Line 75: / Line 54: @@
 === giflib ===
   wget http://downloads.sourceforge.net/project/giflib/giflib%204.x/giflib-4.1.6/giflib-4.1.6.tar.bz2?use_mirror=switch
+ ./configure && make && make install
 = See also =
 * [[KDE on scratchbox]]
 * [[KDE]]
+[[Category:KDE]]

Personal tools

Navigation

Views