N900 Hardware Power management
(New page: The TWL4030 has USB PHY, power managment and audio codec. Category:n900 Category:n900_Hardware) |
|||
| Line 1: | Line 1: | ||
The TWL4030 has USB PHY, power managment and audio codec. | The TWL4030 has USB PHY, power managment and audio codec. | ||
| + | |||
| + | It seems to be documented - not under this part number - at [http://focus.ti.com/docs/prod/folders/print/tps65950.html TIs website] | ||
| + | |||
| + | A quick check indicates the I2C bus addresses match - see 13.3 in above datasheet. | ||
| + | |||
| + | If this is the correct part, the following description applies: | ||
| + | |||
| + | |||
| + | The TPS65950 contains; | ||
| + | * Power management | ||
| + | ** Several regulators - switched mode and LDO. | ||
| + | * Audio codec | ||
| + | ** Five DACs, two ADCs | ||
| + | ** Several power amplifiers. | ||
| + | ** Microphone amplifiers | ||
| + | * USB tranciever | ||
| + | ** Highspeed OTG compatible with integrated charge pump, and carkit support, designed for direct connection to the SoC. | ||
| + | * an ac/USB charger | ||
| + | * LED drivers | ||
| + | * ADC | ||
| + | ** ADC can measure both input voltages to device, or voltages connected externally. | ||
| + | * RTC | ||
| + | * GPIO | ||
| + | ** This can support switches, keypads, ... | ||
[[Category:n900]] [[Category:n900_Hardware]] | [[Category:n900]] [[Category:n900_Hardware]] | ||
Revision as of 13:47, 1 January 2010
The TWL4030 has USB PHY, power managment and audio codec.
It seems to be documented - not under this part number - at TIs website
A quick check indicates the I2C bus addresses match - see 13.3 in above datasheet.
If this is the correct part, the following description applies:
The TPS65950 contains;
- Power management
- Several regulators - switched mode and LDO.
- Audio codec
- Five DACs, two ADCs
- Several power amplifiers.
- Microphone amplifiers
- USB tranciever
- Highspeed OTG compatible with integrated charge pump, and carkit support, designed for direct connection to the SoC.
- an ac/USB charger
- LED drivers
- ADC
- ADC can measure both input voltages to device, or voltages connected externally.
- RTC
- GPIO
- This can support switches, keypads, ...
